Home / Services / Equipment Installations
Services
When a pump, filter, heater or light is past saving, we size the replacement to your pool, install it properly and show you how it works.
Local
Greater Nashville based
Reliable
Weekly, like clockwork
Since 2013
Over a decade of pool care
Family Owned
Real people, real care
What we install
Every pool's equipment pad is a small system. The pump moves the water, the filter cleans it, the heater warms it and the lights and auto fill round it out. When one piece fails or is badly matched, the others work harder and wear out sooner.
Our equipment installations start with the pool, not the product. We measure the gallons, check the plumbing and look at what is already on the pad. Then we recommend equipment from all major brands that fits your pool, your budget and how your family actually swims through a Middle Tennessee season.
Every install is plumbed with unions so it can be serviced later, connected and tested before we leave. You get a clear walk-through of the new equipment, and if you are on our weekly route, the same friendly technician keeps an eye on it every visit.
Our installation services
Choose the equipment you need to learn how we size, install and test it for your pool.
Cartridge, DE or sand filters sized to your pump, plumbed with unions and pressure tested.
Gas heaters and heat pumps sized to your pool and spa, installed and fire tested.
Variable-speed pumps sized to your pool, installed with unions and programmed to save power.
LED pool light replacement with the circuit, GFCI and fixture seal checked and wet tested.
Auto fill water levelers that hold your pool at the right level and protect the pump.
Is it time?
Repairs make sense for many problems, but these signs usually point to new pool equipment.
01
The same pool pump, filter or heater has needed repairs several times.
02
Parts for your pool equipment model are discontinued or hard to find.
03
A cracked pump housing, filter tank or heater cabinet is leaking at the pad.
04
An old single-speed pool pump is driving up your summer electric bill.
05
Your pool light is out, trips the GFCI or has water inside the lens.
06
You top up the pool with a hose every few days in summer.
How we install
The right equipment, sized and installed properly, saves money and service calls for years. Here is what we look at first.
01
Bigger is not always better on a pool pad. A pump that is too large for the plumbing wastes power, and a filter too small for the pump runs at high pressure and needs constant cleaning. We start every pool equipment installation by measuring the pool's gallons, the pipe size and the existing equipment. That way the new pump, filter or heater fits the system it joins and works with it, instead of against it.
02
When one piece of older equipment fails, the rest is often close behind. A new variable-speed pump can expose an undersized filter, and a heater may need a minimum flow to fire. If several parts of your pad are near the end of their life, replacing them together saves a second visit and keeps everything matched. If the rest of the pad is in good shape, we will tell you that too.
03
Equipment has to sit in the right order on the pad: pump, then filter, then heater, then any salt cell or chlorinator, so concentrated chlorine never flows back through the heater. We plumb new pool equipment with unions and isolation valves so it can be serviced or winterized without cutting pipe. Pressure is tested, joints are checked for leaks and the clean filter pressure is recorded before we leave.
04
Pool equipment in Greater Nashville deals with hot, humid summers, heavy pollen and leaf loads, afternoon thunderstorms and freezing winter nights. We choose and install equipment with that in mind: filters with room for fall leaves, pumps programmed for summer turnover, heaters and auto fills with valves that make fall winterizing simple. The goal is equipment that handles every season without surprises.
05
Passion Pool Care has been family-owned since 2013 and is run by John and Tammy from Murfreesboro. We serve Nashville, Brentwood, Franklin, Belle Meade, Green Hills, Spring Hill and nearby communities. Every pool equipment installation starts with a free, no-pressure quote, and there are no long-term contracts. We earn your business every week, and we will give you a straight answer on whether to repair or replace.
Not sure what your pool needs?
Describe what you are seeing and we will tell you, honestly, what it takes to fix it.
How it works
1
Call (615) 624-7624 or send the form. We look at your pool and your goals, then give you an honest price.
2
The same friendly tech arrives on schedule with the gear and chemistry to make your water clear and keep it that way.
3
We care for every aspect of your pool and share helpful tips, so you can relax and enjoy the water.
FAQ
Still have a question? Call or text (615) 624-7624.
It depends on the equipment and your existing pad, so we give a free, no-obligation quote after seeing your pool. Call (615) 624-7624.
A single worn part is often worth repairing. If the equipment is old, parts are discontinued or repairs keep repeating, replacement is usually the better value.
We install equipment from all major brands and recommend what fits your pool, your pad and your budget.
In most cases, yes. We confirm compatibility with your automation system before any pool equipment installation.
Yes. We remove and haul away the old pump, filter, heater or light as part of the installation.
No. Passion Pool Care works on in-ground residential pools and select commercial pools only.
Tell us what is failing on your pad, and we will recommend the right replacement. Call (615) 624-7624 for a free, no-pressure quote.
Where we work
Based in Murfreesboro and caring for pools across Middle Tennessee. Find your county to see the cities we cover.
Call (615) 624-7624 and we'll check availability for your address.
